MINI STOCK RULES 2010

DRIVER SAFETY

1.  CSA approved helmet is mandatory, 1995 snell or newer. Because windshield have been removed, eye protection in the form full face visors are mandatory.

2.  Fire rated racing suits must be worn.  No coveralls.  Gloves are recommended.

3.  A complete (6) point roll cage is mandatory.  Cage must be made of black iron pipe or steel tubing minimum size 1½” O.D.              and 1/8" wall thickness.  Cage must have minimum of 3 horizontal door bars connected by at least (2) rows of vertical bars.              The main support hoop should be supported forward and back.  Main hoop behind drivers head should have an “X” brace.   A          support bar from “A” pillar down to the top door bar is mandatory.   Vertical support bar in centre of windshield from dash to          roof. g Only circle track style cages will be accepted.

4.  Seat must remain in stock position anchored to roll cage and frame by (4) 3/8" bolts and seat back attached to roll cage by (2)           3/8" bolts.  Driver must have at least 4" top clearance between helmet and roof.  Roll bar padding must be used on all tubing            that is within 18" of driver.

5.  Five (5) points seat belts properly bolted.

6.  Each car must have a reinforcement right front wheel and racing wheelnuts and tire must have tube installed.

7.  Each car must have a tow hook front and back, mounted on bumper and must be visible to safety staff.

8.  Car number must be 18" high on both sides and roof. Must be professionally done.

9.   Appearance: car must be properly painted, neatly lettered and washed. For your fans on race night.

10. Weight: 2,000 lbs- 4 cylinders ( including driver)                Maximum engine size 3.0 litre /or 3,000 cc

      Weight: 2,600 lbs- 5,6 cylinders ( including driver)

      Optional panel skinning - 200lbs penalty (driver door excluded)

11. Open to all compact cars 1980 thru 2003, no more than 105" wheelbase. No pickups, convertibles or 4 wheel drive vehicles.

12. All glass must be removed, including windshield, all lights, reflectors, ornaments etc.... must be removed. Headlight and tail light holes must be covered with sheet metal.

13. Windshield space must have heavy  mesh screen (min. 1" heavy gauge, no chicken wire) totally covering it. Drivers window must have an approved window net on driver's side.

14.  No mirrors or radios allowed.

  15.  Carpet, seats and interior trim must be removed. Cars must have solid floors and body panels.

  16. All cars must have a complete body including full hood, doors ( welded shut), fenders, trunk lid and full floor. No skinning of            any panels. Car must  remain stock in appearance. No cock-pit.  No hood scoops.

  17. Outside rub bars permitted, flush to body panels with no sharp edges or ends. 1 ½ maximum size.

                                     18. Front and rear bumpers must be stock. Wheel opening may be cut for clearance 2" maximum. No                                             outside reinforcing on the front or the back.

                                                                                                                                                                                         See other side